These are parts I manufacture, and most of which I have designed for my Auto Trail Expedition 66 campervan, and now offer for sale. Many have wider appeal as you can see in the descriptions. Click on any of the links below for more information.
NEW STORE OPEN NOW !!
For purchases, please go to my new store campervan.parts.

Fitting most vans, these window stays keep a window open enough for good ventilation, stopping the window from flapping around in the wind.
NEW IMPROVED design incorporating clip for storage on the window struts.
Standard size opens the window about 80mm and is £4/pair. Large size opens by about 120mm and are £6/pair.

For Auto Trail vans that have aluminium rods to support the bed. Those rods fit into plastic slots that can break or go missing.
Price is £2.00 per pair.

For the Expedition vans that have a gas locker, these knobs replace the large metal key, making access to the locker much more convenient.
First design for all vans with a locker, except the 2025 66/67 vans, and is £4.00 for a pair, plus delivery. Second design is for 2025 66/67 vans, £3 for one.

These fit the foldaway sinks fitted to the Expedition and V-Line vans, to allow access for cleaning to the secondary sink and drain that the water tips into.
Price is £26, plus delivery.

Versions for 2L water bottles and 0.75L wine bottles, these hold a bottle safely and with quick and easy access.
Price is £9.00, plus delivery.

If you have 1L bottles of milk or juice in your fridge, then you can’t use the lower shelf position. Unless you have these risers.
Price is £7.00 for the pair, plus delivery. Please specify if you have a Dometic or Thetford fridge.

A solution for showers that switch off prematurely, usually at the precise moment that you’ve got shower gel foam in your eyes!
Price is £10.

Clamps for the drain pipes on Auto Trail campervans, to stop them rotating when the taps are used. Easy to fit and supplied with stainless steel bolts and Allen key.
Price is £24.

Now you can dry your pooch’s fur using a pet hose attached to this air vent which replaces any standard Whale or Truma 65mm air vent. Also works with human hair!
Price is £14.

These extend the existing bump stops so that the rear windows don’t hit the bodywork when the rear doors are fully opened.
Price is £12.

This fits neatly on either of the shelves in the bathroom cabinet in AutoTrail campervans, helping keep pills and tubes neatly organised.
They have 3 small compartments for pills and one large compartment for pastes and creams.
Price is £11. Also there are 2 optional inserts, one for up to 4 toothbrushes (£2) and one for up to 2 electric toothbrushes (£3).

This is a guard to stop food from freezing on the cooling fins at the back of the fridge. It simply pushes onto 2 fins and keeps fruit and veg from touching the fins and getting frozen. Sold as a pair to cover the width of the fins, for £10. Fits Dometic 3-way fridges with the fins as shown.

This is a fan holder to put a twin fan in the rear skylight on the Expedition 66 or other vans with a 400mm wide opening. It is designed to fit standard 120mm fans which can be bought on Amazon complete with USB connection and a speed controller. The cable is long enough to reach the USB socket under the cupboard.
At full speed these fans use 3W which is very little drain on your leisure battery.
The holders are sold as a pair for £12.
You will also need a fan such as this one from Amazon.
Assembly requires a Philips screwdriver and takes a few minutes.

For vans where you have a bathroom window, this lets you use the shower outside. It contains 3 strong magnets to hold the shower head securely against the side of your van. To remove, just rotate the holder vertically against the top edge.
The holder is printed in a super-tough plastic, and the magnets are coated to prevent rusting.
The price is £16. There is also a magnetic towel holder for £5.50.

For those with an Expedition 68 or other vans with a solar panel that charges either van or leisure battery via a round 3-position switch, this protects the switch from being pressed accidentally. Price is £3.50.

This new hinger (on the right) is a direct replacement for the original plastic hinge (on the left). It is printed in nylon and uses some metal parts for a stronger result than the original hinge. Price is £16 for the pair.

These hold metal teaspoons, spoons, forks and knives so they don’t rattle. They are designed for use with metal cutlery that doesn’t have plastic handles.
The price for the full set is £15.


These replace the existing rubbery covers on the kitchen sink/basin unit, which have a tendency to pop out and get lost or can get damaged with a hot pan.
A full set including 2 spares costs £5. When ordering please specify if you have the 2025 or later model van where the hob controls are together on the left, as this has different size plugs.

This is a simple rubbery plug to fill the hole in the rear bump stops, to stop rain getting in. They are £5 for the pair.

These are rubbery plugs to cover the screws in the cab door steps. The screws are in holes that otherwise collect dirt, and FIAT do not provide nor sell plugs to fit. They are supplied as set for £5. Please mention the model year and whether you have 2 or 3 screws per step.

This filler makes it easy to fill your water tank without being hit by the sliding door. It connects using a standard hose fitting.
Price is £16. Available in blue/grey/white as shown, or all black.

This is a holder for a set of European LPG adapters. It comes with 3 protective covers (one shown) and has 2 strong magnets for fixing to a wall or top of the steel gas locker. Price is £18.

This is a strap to make it easy to pull the nearside rear door closed from inside the van, plus prevent damage if the doors are closed in the wrong order.
Price is £5.

These are designed to hold the sliding door on Ducato vans at a halfway point, reducing or eliminating the possibility of damaging the rear window. One type still allows the door to be opened fully; the other stops the door completely. Prices are £7 and £10.

This tool makes it easy to remove the restrictor in drain taps, increasing the flow enormously. £2.50.

Useful clip-on hook for the lip of the shelf around the top of the cab in the AutoTrail Expedition range. Price is £2.

The filler on the Ducato is very awkwardly placed, making it difficult to use without spilling washer fluid everywhere. So I’ve designed this little device that fits neatly into the extended filler tube, leaving both hands free to pour in the washer fluid. Price is £11 plus flat rate £3.

If you wear shorts and drive a Ducato van, then at some point you’ve ended up dangling from the handbrake lever when trying to exit. Or youv’ve ripped the shorts. Or bent the levr and broken the plastic base. Save damage and embarassment with this slip-on cover. Price is £15 plus flat rate £3.

Makes it easy to pour water into your water tank, leaving both hands free to hold the watering can. It is slim enough to fit behind the sliding door in case that is opened.
Price is £10 plus flat rate £3. Available in black or blue or grey or white. Please specify if your van door has a padded panel (e.g. V-Line) or not (e.g. Expedition).

These hangars are sold in pairs for hanging items from the side of a Ducato van, for example to dry clothing. They are sturdy and fit into the door channel in seconds. Use with a washing line or just hang items from the hooks. Price is £9 for the pair, plus flat rate £3. If you want a shelf to fit on top, that’s an additional £11.
Kitchen Organisers (splashback)

These organisers fit over the glass splashback back kitchen unit, providing handy storage for tea and coffee etc. There are 3 designs.
The large caddy has 2 large and 1 small section, and is intended to hold teabags, coffee or sugar sachets or a sweetener dispenser.
The small caddy has 2 large sections and is intended to hold small bottles, sponges etc.
The bin has 1 large section.
They do not interfere with the sliding door nor do they prevent the basin/hob lids from being pushed fully back.
The large caddy is £16, small caddy is £11, bin is £12.
Kitchen Organisers for 2025+ Expeditions

These organisers fit at the rear of the kitchen unit, providing handy storage for tea and coffee etc. They fit 2025+ Expedition models as those have no splashback. There are 2 designs.
The large caddy has 2 large and 2 small section, and is intended to hold teabags, coffee and sugar sachets and a sweetener dispenser.
The small caddy has a single large section and is intended to hold small bottles, sponges etc., or be used as a bin.
They do not interfere with the sliding door nor do they prevent the basin/hob lids from being pushed fully back.
The large caddy is £19 and the small caddy is £13.

This makes it much easier to fill the Ad Blue tank from a container of Ad Blue. You get a standard funnel supplied plus an adapter that clips over the handle on the funnel and over the top of the fuel/AdBlue cover on the Ducato. Cost is £10.

If you’ve accidentally knocked the boot light on, and maybe flattened the battery, you’ll understand the need for a protective surround such as this. Cost is £8.

This is for the Expedition 66 and 67 models, or other AutoTrail vans with a rear lounge, to conveniently hold a cuppa. It hooks over the bottom of the window frame on the nearside rear window. Price is £9.

These are replacements for the silicone grommets that support the hob grids on the 2025+ (Thetford) and earlier (Dometic) hobs in AutoTrail vans. The later grill is a single black piece with 4 grommets; the earlier has 2 separate stainless steel grills each with 4 grommets. Prices are £3.50 for 4 (later model) and £5 for 8 (earlier model).

This is a direct replacement for the standard internal handle on the Ducato sliding door. It’s much longer than the original, giving more leverage and making it easier to open the door.
Price is £12.

The 3 drain holes below the Ducato windscreen are easily blocked with leaves, and these inserts stop that from happening while allowing rain to drain away. Supplied as a set of 3 for £8.

These are stronger replacements for the original parts, printed in nylon with a more substantial design.
They fit the original screws so just unscrew both screws, remove the old catch, put the new one in its place, then replace the screws.
Priced at £9 for the set of 3 to replace all 3 catches.






